Andler Packaging Group
376 Third St., Everett, MA 02149 US
Phone:800.333.1113 • Fax:617.387.9858
E-Mail: info@andler.com • Web site: www.andler.com
All Categories > Bottles, Jars and Containers > Pharmaceutical > Ampules > Vacule, Lyophilization Ampule > Item # SCIAND-80015  


Item # SCIAND-80015, Vacule, Lyophilization Ampule

  • Ideal for small volume lyophilization samples
  • Heal or stopper sealed
This small volume lyophilization ampule can be flame-sealed or stored with a stopper in place. They are made of Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. Stoppers can be purchased separately.






Product Information

Ampules
Are all glass containers that can be hermetically sealed to preserve sample purity and extend sample shelf life. Wheaton ampules are ideal for standards packaging, environmental and diagnostic standards, lyophilization and cryogenic storage. These ampules protect against sample contamination due to their tamper-evident seal. A gold band on the stem of the ampule indicates that the ampule is pre-scored to facilitate snapping off the top other ampule eliminating the need to file the ampule.

Sealing Methods
Standard Ampules

Tip Seal Method:While holding the ampule body, Insert the tip of the ampule stem into the sealing fame. Heat the tip approximately 3-4 mm from the top. Gently rotate the ampule White heating the tip until the melted glass fuses into a smooth dome.

Funnel-Top Ampules

Pull Seal Method: In addition to easier filling, the funnel top ampule is easier to seal using the Pull Seal method. Hold the funnel top with one hand and the body of the with the ampules with the other hand. Insert the center of the ampules stem in to the sealing flame. As the glass softens, rotate the ampule white pulling the funnel top off. This will require very little force and will allow the glass to seal itself. This method can be used for all ampule configurations



Print Back